Home About KGCycles Installation Photos SV 650 tips Products Ordering Just For Fun Custom Builders Workshop Email Me CB750 |
|
For some real deals see my auctions on eBay.
Why Paypal?
Shop Without Sharing Your Financial Information.
|
Chrome Carbon Windshieldfor 99 - 02 models
These are all light weight and very thin, just like race fairings.
Two new Fairings for Custom Street and Racing ActionSVS Full fairing SVR6 Full fairing All of the parts listed on this web site meet all racing requirements and are constructed of the Highest quality materials available. The fairing side bracket is the only thing supplied. The SVS Fairing uses the stock mounting brackets and hardware for the SVS. It also uses all of the other stock components from the SVS, dash, gages, windshield, mirrors and other parts. If you are starting with an SV naked version, the brackets and other parts may be found at your local Suzuki dealer, eBay, or motorcycle salvage yards. The fasteners that attach the upper fairing to the lower fairing are not supplied with the fairing. There are many different types and styles of fasteners ( Dzues, Cam loc, & screws) and it is a matter of personnel choice which you use. Please see the installation page of my web site for more on installing the fairing.
SVS Full fairingfor 2002 and older
SVR6 Full fairingfor 2002 and older This is the SVR6 Fairing in both street and racing trim. There is a reason for the R6 in the name. It has the top half of the fairing from a Yamaha 2000 YZF-R6 mated to it. Joining these parts allowed for a very narrow aerodynamic profile and the use of a stock windshield. This is the fairing that is preferred by racers. The lower fairing is common to both the SVR6 and the SVS upper parts. The use of a racing type mounting bracket is required for this installation (available at most racing supply companies). Although it can be used for street (see the gallery), it does demand a bit more skill from the builder. SV Tail Sectionfor 2002 and older The SV Tail section is a replica tail for 02 and older. It is not however an exact replica, so most under pans will not work with out modification. The tail is a one piece unit and can be used with the stock seat. Mounting is with two bolts under the seat in the stock location. It has been told to me that can be used with the stock tail light with little or no cutting (I have not tried it myself).
|