KGCycles Products for Cafe Projects
All parts are made of high quality composite fiberglass materials.
These aren't the old fiberglass stuff you are used to.
If you have any questions about this web site contact me at Ken @KGCycles.com
3/4 Cafe Fairing Now Available
click any photo to enlarge
This is a 3/4 Dunstall style fairing. It can be used with the stock headlight, Speedo and tach. It also has a dash panel. It has a bracket that can be either bolted or welded to the frame. and has brackets to mount the stock gauges and another to support the rear. the windshield will be sold on this web site in the future, but for now it is available from Gustafsson Shields. These are shown as a Norton shield, but it is the one that fits this fairing. This is the standard high screen. http://www.bikescreen.com/proddetail.asp?prod=DunstallGTNorton850 For a lower style screen http://www.bikescreen.com/proddetail.asp?prod=DunstallNortonPro
click here for for prices and to order
Cafe Fender #1
click any photo to enlarge
This fender uses a Sportster style taillight that is faired in, with a molded in tag mount. The mountings are made to fit the frame tight and clean. There are many aftermarket Sportster taillights on the market [shown below right], that are far less expensive than the dealer item. Everything is pre-drilled and ready to paint and bolt on.
Tip From a Customer.
click here for for prices and to order
Cafe Seat #1
click any photo to enlarge
The seat is available in full length to work with the stock tank [above left] but can be easily trimmed [above center] for use with an extended gas tank. The seat can be used with or without the stock hinges and latches. The location of the holes for the hinges and latches are located on the part for easy drilling. Shown below. Seat dimensions are shown below.
On
the left is the seat in full length upholstered in full. On the right is the
seat upholstered with the back painted and cut short to allow for the long tank.
click here for for prices and to order
Inner fender
click any photo to enlarge
Sometimes a part of the bike may not be that visible, but it still just needs to be right. The inner fender that comes on the stock CB75o is made of ABS plastic and when damaged or scared it is very hard to repair or paint. Because this one is fiberglass it can be easily modified and painted to a perfect finish. It is made to fit perfectly to the stock mountings, and is a straight replacement. Everything is pre-drilled and ready to paint and bolt on.
click here for for prices and to order
Cafe Front Fender
click any photo to enlarge
This is a straight bolt on item. It comes pre-drilled and ready to paint and install. It does a nice job to clean up the front end while giving good wet weather coverage. That makes it great for sport or for all weather riding.
click here for for prices and to order
If you have any questions about this web site contact me at Ken @KGCycles.com
Why Paypal?
Shop Without Sharing
Your Financial Information
When you pay with PayPal, your credit card and bank numbers are never seen by
the seller or merchant. Your financial information stays safe. Plus, you're
protected 100% against unauthorized payments sent from your account.
**